- Do you need help? Here Us:
0086-185-3993-1566
info@machinehall.com
Plastic toothpick bottle machine for sale
Leo / 
21 Jul, 2016
Gelgoog provide a full range toothpick making machines, from the start of production process to the end of the process together with the plastic toothpick bottle machine.If you want to quote you can leave a message at the bottom of this page, you can also send mail to leo@machinehall.com
Click here to see all the machines.
Multifunction dual rotating disk vibration toothpick weighing automatic filling machine is designed for automatic filling weighing long toothpick development and design of new products, and improve it after a long trial, double rotary vibration feeding. Taper weighing hopper Weighing different taper mold the material. has uniform speed feeding, infrared sensors, automatic filling and discharge more effectively promote accurate quantitative filling.
Toothpick Bottle Machine Machine Image
Finished image
Click here to see all the machines.
Multifunction dual rotating disk vibration toothpick weighing automatic filling machine is designed for automatic filling weighing long toothpick development and design of new products, and improve it after a long trial, double rotary vibration feeding. Taper weighing hopper Weighing different taper mold the material. has uniform speed feeding, infrared sensors, automatic filling and discharge more effectively promote accurate quantitative filling.
Toothpick Bottle Machine Machine Image
Finished image
【Steps for usage】
1. Plug in the power, turn on the machine side of the switch, the computer control panel dashboard lights full on, the machine issued a "drip ......" tone, were installed by sub-delegated feed button, the machine will automatically enter standby mode is cleared.
2. The need to divide filling a toothpick into the tank, the control panel on the plus / minus buttons to set your desired filling weight.
3. Press the set speed 'fast on the control panel. The Slow "to select the speed you need).
4. Select the speed after the start key on the control panel, the machine into automatic mode and automatically install irrigation with continuous quantitative parameters
5. during dispensing, the need to suspend or toothpick is dispensed finished, press the stop button, the machine is at a standstill standby.
6. Packing packing quantity in the "Quantity" column shows, for clear display value, re-switch again.
7 .. To remove toothpicks inside the machine, press the key once to discharge a clear material, hold the discharge button for 5 seconds and hold for the long clear material, the machine will enter a long discharge status.
10. Dispensing is completed, when a long time, turn off the power switch.
Third, the main technical parameters
1. Power: 220v ± 10% 50HZ
2. Power: 50W
3. Aliquot Weight: 3-50g
4. Aliquot Accuracy: 0-0.3g (depending on material)
5. The dispensing speed: 10-30 beats / min (depending on material and weight without packing)
6. Suitable range: generally toothpick bottle filling
IV Features
1. The machine adopts microcomputer intelligent control, making dispensing more precise, fast and fully automated dispensing process.
2. All parts in contact items made of stainless steel, non-contaminated items.
3. The dual damping structure, the machine runs smoothly, low noise.
4. Small size, light weight
5. The minimum power, energy conservation
6. Projectile feeding, do not squeeze the material damage, especially for packing fragile materials.
5. Uses
Irregular for a variety of items, such as bars, round and other general non-sticky solid materials, strip length in 1.2-40mm
six. Dispensing machines, bottle conveying specific operation may refer to specific instructions.